BYD Seal 2024 - Anti-Theft Alarm System

Anti-theft Alarm
System*
Anti-theft Alarm System*
Arming the system
1. Switch the ignition off.
2.
All occupants get off the vehicle.
3. Lock all doors. This makes the
anti-theft indicator steady on. The
anti-theft alarm system will arm
automatically after 10 seconds, and
the anti-theft indicator will then begin
to flash.
4. You can leave the vehicle after
confirming that the indicator begins to
flash. Since unlocking the door from
inside the vehicle will activate the
system, never let anyone stay in the
vehicle with the system enabled.
Triggering the alarm
●
The system, when armed, will raise an
alarm* with flashing turn signals in any
of the following situations:
●
Any door, trunk, or hood is opened
without using the keyless access
function of the smart key.
●
Use the mechanical key to unlock the
vehicle.
Disarming the system
●
Anti-theft alarm can be stopped by:
●
Unlocking the door with a valid smart
key/NFC key.
●
Using the microswitch to unlock the
door by carrying a valid smart key.
●
Opening the trunk remotely with a
valid smart key.
●
Starting the vehicle remotely with a
valid smart key.
●
Pressing the "START/STOP" button
inside the vehicle while carrying a
valid smart key.
WARNING
●
Do not modify the anti-theft
system by means of alteration or
addition. Otherwise, the system
may fail.
Anti-theft Indicator
With the vehicle power OFF and four
doors locked, the anti-theft indicator will
stay on for about 10s after the anti-theft
mode is activated.
30