CAUTION
●
When using the remote control
function to raise windows, pay
attention to the safety of
occupants in the vehicle, and use
this function only after making
sure the windows are clear from
pinching anyone.
Locking/Unlocking with Microswitch
Locking
●
With the doors closed but not locked,
press the microswitch on the front
door handle while carrying the smart
key, then all doors lock at the same
time. The hidden door handles fold
automatically. If the vehicle is shut
down, the side mirrors will fold (when
the Auto-Fold is enabled) with turn
signals flashing once. If the ignition has
not been switched off, the side mirrors
will not fold, the turn signals will not
flash, and the alarm will sound once.
●
If any door is unlocked, the side
mirrors do not fold, the turn signals do
not flash, the door handles do not fold
and the alarm sounds once.
●
If the hood or trunk is not closed,
the side mirrors do not fold*, the turn
signals do not flash, and the alarm
sounds once.
Unlocking
●
When the vehicle is locked, press the
microswitch on the front door handle
while carrying the smart key. All doors
unlock at the same time. The hidden
door handle extends automatically and
the turn signal flashes twice.
●
If the anti-theft alarm system is
armed, open a door within 30 seconds
after the unlocking, or all doors will
relock automatically and the four door
handles retract*.
●
Pressing the microswitch does not
work if:
●
This is performed while a door is
being opened or closed.
●
The key is left in the vehicle.
REMINDER
●
If the electronic smart key is too
close to an exterior door handle or
window, it may not be possible to
activate the entry function.
Raising/Lowering Windows with
Microswitch
●
When the ignition is switched off,
press and hold the microswitch while
carrying the smart key to roll up
or down all windows (By default,
lifting the window function is activated
and lowering the window function is
closed).
●
To enable or disable microswitch
lifting/lowering window function, go
to infotainment touchscreen →
→
Vehicle Settings → Window and Lock.
Locking/Unlocking the Trunk
Opening the trunk with smart key
Double-press the trunk release button on
the smart key. The turn signals then flash
twice.
53
03
CONTROLLER OPERATION
To Next Page
Loading...
