Smart Charging
●
The charging mode can be set on the
infotainment system. To access the
setting:
●
Go to the setting interface through
the Smart Charging APP in the
infotainment application list.
●
Go to the "Smart Charging" setting
interface through
(infotainment
system) → New Energy;
●
Go to the setting interface by
calling "Hi, BYD. Turn on the Smart
Charging"; "Hi, BYD. I want to use
the Smart Charging"; and "Hi, BYD.
Please turn on the Smart Charging".
●
Exit the Smart Charging screen by
tapping the return key
/home key
or using intelligent voice:
●
Exit the setting interface by calling
"Hi, BYD. Turn o the Smart
Charging"; "Hi, BYD. Exit the Smart
Charging mode".
Setting screen
① Settings
② Reservation charging
③ Charging start time
④ Repeat cycle
⑤ Charging waiting time
●
The factory default setting is to
charge the vehicle immediately. That
is, reservation charging is disabled.
●
To activate the Reservation Charging,
tap the Reservation Charging ① ON,
set the Start time ② of charging and
Period ③, and tap "OK" to save the
settings.
●
After successful setting of the
Reservation Charging, a prompt of the
charging start time is given by the
infotainment system if the charger
is connected or the power button is
pressed within the charging waiting
time to power o the vehicle; at
this time, you can switch to Instant
Charging as needed.
●
Tap the Smart Charging icon
①
to turn o the "Plug in charger"
reminder and "Power o" reminder in
the "Reservation Charging Reminder".
REMINDER
●
The instant charging option on the
reminder screen is valid for the
current reservation only. To cancel
all reservations, turn charging
reservation o on the reservation
setting screen.
●
The smart charging function is
only applicable to the BYD AC
charging pile. If it needs to
be applied to public charging
facilities, please conrm that
the facilities support vehicle-end
reservations.
●
In the event of low battery,
the vehicle is charged to the
minimum level before scheduled
charging begins. In this process,
the infotainment system still
gives reminder messages for
power-o and charging connector
connection, and a related
message is displayed at the lower
part of the instrument cluster.
102