BYD SEAL U DM-i - Electric Parking Brake (EPB)

WARNING
●
If the engine or motor is shut
down, do not move the vehicle
after shifting to the N position to
avoid accidents due to insu󽗋cient
braking force.
●
If the engine/motor is running
and the vehicle is in R/D, be sure
to press the brake pedal to stop
the vehicle. Because even under
idle conditions, the transmission
can still transmit power, and the
vehicle may move forward slowly.
●
If you want to shift a gear while
driving forward, do not step on
the accelerator pedal to prevent
accidents.
●
Never shift to "R" or press the
"P" button while the vehicle
is moving, in order to prevent
accidents.
●
Do not drive the vehicle down a
slope when it is in the "N" gear,
even if the engine or motor is not
running.
●
To prevent inadvertent vehicle
movement, apply the parking
brake when the vehicle comes to a
full stop and press the "P" button.
Electric Parking Brake
(EPB)
EPB Switch
Make sure that the Electronic Parking
Brake (EPB )is engaged when parking and
leaving the vehicle.
Engaging EPB Manually
When the vehicle is not in P and EPB
is released, press the brake pedal and
engage EPB from the touchscreen. EPB
applies appropriate parking force, and
󽗊ashes and then stays on with a text
prompt displaying "EPB engaged".
CAUTION
●
The 󽗊ashing indicates the EPB
is working. If the vehicle is on a
slope, do not release the brake
pedal to avoid sliding. Release the
brake pedal after the indicator
stays on.
Engaging EPB Automatically
●
Engaging EPB automatically when
the ignition is switched o󽗈
●
Switching the power from ON to
OFF engages the EPB automatically.
The indicator on the instrument
cluster lights up.
●
Shifting into "P" automatically
●
Press and hold the brake pedal to
stop the vehicle, and shift to P
to automatically engage EPB. Do
not release the brake pedal until
the corresponding indicator on the
instrument cluster stops 󽗊ashing
and stays on with a text prompt
displaying "EPB engaged".
130