BYD SEAL U DM-i - Automatic Vehicle Hold (AVH)

●
When the vehicle is powered o󽗈, if the
EPB is engaged, the indicator
on
the instrument cluster lights up for a
few seconds and then goes out.
●
When the vehicle is powered on, the
EPB system performs self-inspection.
The indicator on the instrument
cluster lights up for a few seconds and
then goes out. If it does not go out,
it indicates that the EPB system may
be faulty. In this case, contact a BYD
authorised dealer or service provider
immediately.
EPB Operating Sound
●
When the EPB is engaged or released,
the driver may hear the sound of the
EPB motor running.
●
If there is a burning smell or unusual
noises after emergency braking is
activated, contact a BYD authorised
dealer or service provider immediately.
WARNING
●
In order to prevent the vehicle
from sliding, the gear must be
shifted to "P" gear before leaving
the vehicle.
●
When the vehicle is running,
passengers are prohibited from
operating the P gear switch to
avoid serious accidents.
●
When the EPB switch is pulled
or released, the brake pedal
must be pressed to prevent
the vehicle from moving, and
the subsequent locking of the
gearshift that occurs because
EPB cannot provide a su󽗋cient
parking force.
●
Avoid using the EPB system to
stop the vehicle. The emergency
braking function can only be
activated in case of emergency
WARNING
situations such as pedal brake
failure or brake pedal blocked.
●
Because EPB cannot exceed
the physical limit of road
adhesion, using the emergency
braking function when passing
through curves, dangerous roads,
and tra󽗋c congestion sections,
or driving in severe weather
conditions may cause the vehicle
to drift, slip or deviate, so
attention should be paid to avoid
accidents.
Automatic Vehicle Hold
(AVH)
AVH Switch
Auto Vehicle Hold (AVH)is used when it
is necessary to stop the vehicle and wait
for a long time, such as encountering
a tra󽗋c jam on a slope or waiting
at a tra󽗋c light. The AVH function is
automatically triggered when the brake
pedal is pressed to stop the vehicle
(vehicle speed decreases to zero) on
the premise that the vehicle meets the
conditions for AVH standby status.
Press the AVH button to turn AVH on.
132