BYD SEAL U DM-i - Page 140

the driver must stay alert and be ready
to brake.
●
If ACC is activated with the vehicle
stationary, the system identi󽗉es any
stationary obstacle ahead and keeps
the vehicle still to ensure a safe
startup and prevent collision. However,
this function cannot identify all the
obstacles, so the driver must be alert
to the front obstacles or other tra󽗋c
participants.
●
Changing the vehicle structure, such
as lowering the chassis or changing
the front licence mounting plate, may
a󽗈ect the ACC system.
●
Do not use the ACC system when
visibility is poor, or when driving on
slopes, winding roads, or wet roads
(covered in ice/snow or 󽗊ooded).
●
ACC cannot be activated in special
driving modes like tow/snow/mud/
sand/terrain (if the vehicle is
eqquipped).
●
Make sure to go to a BYD authorised
dealer or service provider for
professional calibration and checking
of front mmWave radars or the multi-
purpose camera in any of the following
situations:
●
The front mmWave radar, front
bumper, front windscreen or multi-
purpose camera has been removed.
●
Wheel alignment has been carried
out.
●
The vehicle has experienced a
collision.
●
ACC system performance has
degraded or the instrument cluster
has prompted an system error.
WARNING
●
ACC serves as a driver assistance
function only, so the driver is fully
responsible for driving safety.
●
In󽗊uence of weather, road
conditions, and other factors may
cause ACC to fail.
●
Use ACC based on your needs,
tra󽗋c, and road conditions.
Intelligent Cruise Control
(ICC)*
●
On the basis of realizing the speed
control and distance keeping function
of Adaptive Cruise Control (ACC),
Intelligent Cruise Control (ICC) System
adds the function of assisting the
vehicle to centre and keep in the
current lane. Intelligent Cruise Control
(ICC)*, with the speed range of
0-130km/h (0-81mph), helps to control
the vehicle both longitudinally and
transversely to reduce the driving
burden and provide a safe and
comfortable driving environment.
●
When the function is enabled, the
driver must always hold the steering
wheel and control the vehicle when
necessary.
●
ACC maintains the vehicle at a constant
speed or at a 󽗉xed distance to the
vehicle ahead through longitudinal
control.
Status Description
●
ICC standby:
●
The ICC system is on standby
by default and can be manually
activated. If the vehicle does not
meet activation conditions, the
vehicle must be checked until such
139
04
USING AND DRIVING