BYD SEAL U DM-i - Page 152

●
RCTB may be activated in the following
senarios, whether or not it can be
activated depends on a variety of
factors such as the self vehicle, the
target vehicle and the environment, we
have not listed all the RCTB scenarios.
●
When the system detects a pedeatrian
crossing laterally at the side and rear
when the vehicle is backing up at low
speed, the system determines in real
time whether there is a risk of collsion.
If there is a risk of collsion, the system
will apply emergency braking to avoid
or mitigate collision hazards.
●
Limitations of the system: Due to the
fact that the activation of the system
is dependent on the environment, its
own state and the state of the target,
there is no guarantee that the system
can active the emergency brake every
time in this scenario.
Rear Collision Warning (RCW)*
●
At vehicle speeds between 5-146km/
h(3-90mph), if rear corner mmWave
radar sensors detect a risk of collision
with a vehicle approaching too quickly
from behind on the current lane, the
hazard warning light turns on to warn
the driver in that vehicle against a
possible collision.
DOW*
●
DOW is realised with rear corner
mmWave radars installed on both sides
of the rear bumper. When the vehicle
is stationary with doors unlocked,
the system keeps indicators on side
mirrors solid on to warn the driver if
moving objects, such as bicycles or
motorcars, approach from behind on
an adjacent lane. At the same time,
a prompt message is displayed on
the instrument cluster. If the driver
attempts to open the door at this time,
indicators on side mirrors begin to
󽗊ash and a chime sounds.
How to Use
Enable or disable BSD, RCTA, RCTB, RCW,
or DOW in → ADAS → Active Safety
→ Blind Spot Assist.
When the blind spot assist system is
disabled, no relevant indicators are
displayed on the instrument cluster.
When the blind spot assist system is
standing by, if vehicle conditions, such
as speed or gear status, do not meet
the requirements of any function,
is
displayed on the instrument cluster and
blind spot assist will not be activated.
If the blind spot assist system
malfunctions,
is displayed on the
instrument cluster.
When the blind spot assist system is
active, is displayed, meaning that
151
04
USING AND DRIVING