BYD SEAL U DM-i - Page 154

and emits visual and/or audible alarms
when the vehicle speed exceeds the
detected speed limit (intelligent speed
limit information (ISLI)).
How to Use
●
To enable or disable TSR, go to
→
ADAS → Driver Assistance → TSR from
the touchscreen.
●
When TSR recognizes the current tra󽗋c
sign, the instrument cluster displays
.
●
When TSR is unsure whether the
speed limit value currently recognized
is suitable for the current road
environment, the cluster displays
.
●
When TSR experiences reduced
performance, the cluster displays
.
●
When TSR experiences reduced
performance and is unsure whether
the speed limit value currently
recognized is suitable for the current
road environment, the cluster displays
.
●
If the TSR system malfunctions, The
cluster displays
.
●
When TSR is disabled manually, the
cluster displays .
●
The speci󽗉c numbers displayed in the
indicators depend on the actual tra󽗋c
signs.
●
TSR features a power-o󽗈 memory
function. When the vehicle is powered
on again, TSR restores the speed limit
state and value before the last power-
o󽗈.
Precautions
●
The tra󽗋c sign recognition system can
identify speed limit signs only, and will
not control speed. The control over
the vehicle always vests in the driver.
Please drive properly.
●
Weight limit signs not in standard
size as per national regulations may
mistakenly be identi󽗉ed as speed limit
signs.
●
If a speed limit sign is unclear or
distorted, inclined, re󽗊ective, partly
blocked or covered, the camera may
be unable to recognise the sign
completely or clearly.
●
TSR performance depends on weather
conditions, lighting, and sign visibility.
The system may fail to or incorrectly
identify the sign at night or sunset,
in rainy, foggy, hazy, snowy or dusty
environment, when light is coming
from the back of the vehicle, or when
there is a sudden change in lighting.
●
In case there is a collision or the
camera sensor has been reassembled,
it is recommended to go to a BYD
authorised dealer or service provider
for sensor calibration so as to avoid
a󽗈ecting system performance.
WARNING
●
TSR serves as a driver assistance
function only, so the driver must
be fully responsible for driving
safety.
●
In󽗊uence of weather, road
conditions, and other factors may
cause TSR to fail or lead to late
alarms.
●
Use TSR based on your needs,
tra󽗋c, and road conditions.
153
04
USING AND DRIVING