BYD SEAL U DM-i - Page 159

●
3D view: tap the icon ③ to turn on 3D
panoramic view, which may be shown
in di󽗈erent view angles by either
dragging the image or by tapping a
speci󽗉c view icon.
●
When the reverse gear is engaged, the
system displays the panoramic view.
The rear view displayed in the right
area contains the vehicle reversing
guide line.
Interface icons:
Function
Corres
pondin
g icons
Operation description
Target state after
operation
Remarks
Panoramic
view
camera
interface
Operate by touch. After a single
touch, if it is highlighted as
shown in the 󽗉gure, it indicates
that the panoramic view interface
is entered.
Enter 2D or 3D
panoramic view
interface
Setting
Interface
Operate by touch. After a single
touch, if it is highlighted as
shown in the 󽗉gure, it indicates
that the panoramic view setting
interface is entered.
Enter the
panoramic view
setting interface
Panoramic
view of
non-
transparen
t vehicle
Operate by touch. After a
single touch, if it is not
highlighted as shown in the
󽗉gure, it indicates that the non-
transparent panoramic function
is activated.
The panoramic
view vehicle
body is switched
from transparent
vehicle to actual
vehicle.
After
switching,
the aerial
view and
2D view
are all
actual
vehicle.
Transparen
t vehicle
panoramic
function
Operate by touch. After a single
touch, if it is highlighted as
shown in the 󽗉gure, it indicates
that the transparent panoramic
function is activated.
The panoramic
view vehicle body
is switched from
actual vehicle
to transparent
vehicle.
After
switching,
the aerial
view and
2D view
are all
transpare
nt vehicle.
Radar arc
segment
Operate by touch. After a single
touch, if it is highlighted as
shown in the 󽗉gure, it indicates
After the radar
triggers the
alarm, the arc
segment and value
158