that the radar arc segment is
activated.
indicating the
radar distance
will be displayed
around the 2D
vehicle body view.
3D
panoramic
function
Operate by touch. After a single
touch, if it is highlighted as
shown in the gure, it indicates
that the 3D panoramic function is
activated.
The panoramic
view vehicle body
switches from 2D
to 3D.
2D
panoramic
function
Operate by touch. After a single
touch, if it is highlighted as
shown in the gure, it indicates
that the 2D panoramic function is
activated.
The panoramic
view vehicle body
switches from 3D
to 2D.
2D:
Function
Corres
pondin
g icons
Operation description
Target state after
operation
Remarks
2D front
view
Operate by touch. After a
single touch, the icon will
be highlighted to activate
the front view as shown
in the gure.
The panoramic view
interface is switched
from any other 2D
interface to 2D front
view interface. If it is
already the front view
interface, there is no
change.
The
operations can
also be
completed
through the
corresponding
upper, lower,
left and right
areas in the
aerial view,
which can get
the same
result.
2D rear
view
Operate by touch. After a
single touch, the icon will
be highlighted to activate
the front view as shown
in the gure.
The panoramic view
interface is switched
from any other 2D
interface to 2D rear
view interface. If it is
already the rear view
interface, there is no
change.
The
operations can
also be
completed
through the
corresponding
upper, lower,
left and right
areas in the
aerial view,
which can get
159
04
USING AND DRIVING
To Next Page
Loading...
