BYD SEAL U DM-i - Page 162

interface. If it is
already the left
and right side view
interface, there is no
change.
3D:
Function
Corresp
onding
icons
Operation
description
Target state after
operation
Remarks
3D front
view
Operate by touch.
After a single
touch, the icon will
be highlighted to
activate the front
view as shown in the
󽗉gure.
The panoramic view
interface is switched
from any other 3D
interface to 3D front
view interface. If it
is already the front
view interface, there
is no change.
The operations
can also be
completed through
the corresponding
upper, lower, left
and right areas in
the aerial view,
which can get the
same result.
3D rear
view
Operate by touch.
After a single
touch, the icon will
be highlighted to
activate the front
view as shown in the
󽗉gure.
The panoramic view
interface is switched
from any other 3D
interface to 3D rear
view interface. If it
is already the rear
view interface, there
is no change.
The operations
can also be
completed through
the corresponding
upper, lower, left
and right areas in
the aerial view,
which can get the
same result.
3D left view
Operate by touch.
After a single
touch, the icon will
be highlighted to
activate the front
view as shown in the
󽗉gure.
The panoramic view
interface is switched
from any other 3D
interface to 3D left
view interface. If it is
already the left view
interface, there is no
change.
The operations
can also be
completed through
the corresponding
upper, lower, left
and right areas in
the aerial view,
which can get the
same result.
3D right
view
Operate by touch.
After a single
touch, the icon will
be highlighted to
activate the front
view as shown in the
󽗉gure.
The panoramic view
interface is switched
from any other 3D
interface to 3D right
view interface. If it
is already the right
The operations
can also be
completed through
the corresponding
upper, lower, left
and right areas in
the aerial view,
161
04
USING AND DRIVING