EasyManua.ls Logo

BYD SEAL U DM-i - Page 173

BYD SEAL U DM-i
260 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
even though the steering wheel is
turned. ABS helps prevent locking
and maintain steering control since
pulsating prompt brake is much faster
than human reaction.
Never pulsate the brake pedal;
otherwise, ABS may malfunction.
While steering away from danger,
a 󽗉rm and steady pressure should
always be maintained on the brake
pedal for the ABS to work.
When ABS is activated, noise may be
heard. This is normal because the ABS
is pulsating the brake quickly.
CAUTION
If the ABS fault warning light is
still on while the braking system
warning light is on, immediately
park the vehicle in a safe place.
It is recommended to contact a
BYD authorised dealer or service
provider.
In this case, if brakes are applied,
the ABS will not work and the
vehicle will become extremely
unstable.
ABS cannot reduce the time and
distance required to brake the
vehicle. This device only helps you
control steering when braking.
Please always keep a safe distance
from other vehicles.
ABS cannot prevent skidding
caused by sudden direction
change, such as trying to make
a sharp turn or change lanes
suddenly. Always drive carefully at
a safe speed, regardless of road
and weather conditions.
ABS does not prevent decrease
in stability either. When applying
the brake in an emergency, the
steering should be moderate. A
CAUTION
large or sharp turn during the
driving can cause the vehicle to
swerve into oncoming tra󽗋c or
run o󽗈 the road.
When running on soft or uneven
surfaces (such as gravel or snow),
a vehicle with ABS may require
a longer braking distance than
a vehicle without ABS. In such
cases, slow down and keep a long
distance from other vehicles.
WARNING
ABS cannot work e󽗈ectively under
the following conditions:
Tyres used do not have
a su󽗋cient grip level (e.g.,
excessively worn tyres are used
on snow-covered roads);
The vehicle skids when driving
at a high speed on slippery
roads.
ABS is not designed to reduce the
braking distance of the vehicle.
Always keep a safe distance from
the vehicle ahead when:
Driving on muddy, sandy or
snowy roads;
Driving on uneven roads or with
multiple potholes;
Bumpy roads.
172

Table of Contents

Related product manuals