BYD SEAL U DM-i - Page 186

arrow on the screen, or touch the
temperature display area and then
swipe downwards/upwards.
●
When it is adjusted to the coldest
position, "LO" is displayed. highest
value.
●
Front passenger's temperature control
button
●
Individual Mode: Temperature
regulation on the front passenger
side.
●
Relative Mode: This mode is for
setting temperature for the front
passenger space, and then quitting
the linkage mode and entering the
independent mode.
●
To increase/decrease the
temperature, tap the upper/lower
arrow on the screen, or touch the
temperature display area and then
swipe downwards/upwards.
●
When it is adjusted to the coldest
position, "LO" is displayed. highest
value.
Independent control button
●
Tap this button to switch from
independent mode to associated
mode.
●
Individual Mode: The temperature
of the driver's side and front
passenger's side can be set
seperately. When the individual
mode is selected, the button icon
lights up.
●
Relative Mode: Adjust the driver
side and front passenger side set
temperature at the same time by the
driver side temperature control. In
the relative mode, the press icon is
grey.
●
When the front passenger's
temperature control is operated in
relative mode, the A/C system will
automatically switch to individual
mode.
Max cooling
●
Tap this button to switch the A/C to
the maximum cooling control mode.
The compressor is turned on, the
temperature is adjusted to LO, the
blower speed is adjusted to the
maximum, the recirculation mode is
activated, and air blows in face level
mode.
●
Tap this button again to exit.
Cooling
Tap this button to turn on the A/C.
At this time, the icon lights up and
the compressor starts to work. Tap this
button again to turn o󽗈 the A/C, the
icon goes out and the compressor stops
working.
Circulation mode
●
Tap this button to switch the air inlet
mode to recirculation, and the icon
is displayed. Tap this button
again to switch the air inlet mode
to fresh air, and the icon
is
displayed.
●
When the "automatic recirculation
when parking" function is enabled,
to ensure air quality in the vehicle
and prevent the vehicle exhaust from
entering the vehicle, the recirculation
mode is switched on automatically
after you shift into "P".
Rear defroster
●
Tap this button to heat up and
defrost the rear windscreen and side
mirrors. The function is automatically
deactivated after 15-minute inactivity
of the associated button. Tap this
button a second time to disable the
function.
●
This function is not for drying
raindrops or melting snow.
185
05
IN-VEHICLE DEVICES