BYD SEAL U DM-i - Air Purification System

Air Puri󽗉cation System*
The air puri󽗉cation system puri󽗉es
airborne PM2.5 particles. When A/C
is turned on, the system thoroughly
removes PM2.5 particles from the air
blown into the cabin.
Air puri󽗉cation operation interface
Tap "Air puri󽗉cation" on the touchscreen.
① Air puri󽗉cation interface
② Quick puri󽗉cation button
③ PM2.5 Detection Button
④ Outside PM2.5 Value Display
⑤ In-Vehicle PM2.5 Value Display
PM2.5 detection
●
Tap this button to detect interior
and exterior air quality. The detection
values and levels are displayed on the
PAD in real time.
●
Tap this button again to turn o󽗈 the air
quality detection function.
Quick puri󽗉cation
●
Activates or
●
Tap it a second time to end fast
puri󽗉cation.
In-Vehicle PM2.5 Value Display
●
Tap this icon to display the interior air
PM2.5 value and level.
REMINDER
●
The PM2.5 value detected by the
on-board air puri󽗉cation (PM2.5)
detector is the PM2.5 value in
the air near the vehicle carrying
the device in a short time, which
should be di󽗈erent from the
daily or real-time PM2.5 value
declared by national and relevant
government authorities.
188