EasyManua.ls Logo

BYD SEAL U DM-i - Page 197

BYD SEAL U DM-i
260 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2. When installed at the lower height
position, the boot cover board is stuck
on the lower step surface of the
support plate, and the storage space
can be enlarged.
Safety Hammer
The safety hammer is located in the
centre stowage compartment.
The tool is to be used on side door glass
only.
It is to be only used in case of emergency
exit from the vehicle.
How to Use
1. Open the centre stowage compartment
to reveal the safety hammer 󽗉xed to
the right wall of thecentre stowage
compartment.
2. Remove the hammer from the stowage
compartment.
3. Remove any cover of the hammer end.
4. Hold the handle 󽗉rmly, hold the
hammer end against the glass, push
against the glass to activate the spring
release.
WARNING
If the side door glass is laminated,
it may not shatter and may remain
in position.
Once the glass is fractured
and weakened, use appropriate
method to push the fractured
glass out of the door aperture.
Take all necessary precautions to
not be injured by any broken
glass.
196

Table of Contents

Related product manuals