BYD SEAL U DM-i - Page 211

4WD
High-temperature expansion tank
●
The 󽗊uid level meets the requirement
when it is between the MAX (maximum
󽗊uid level) and MIN (minimum 󽗊uid
level) marks of the expansion tank.
●
Always use the coolant with
speci󽗉cations same as the original
manufacturer's product. No admixture
is required. Di󽗈erent brands and types
of coolant should not be mixed.
REMINDER
●
Go to a BYD authorized dealer
or service provider for coolant
addition.
CAUTION
●
Do not add any rust inhibitor
or other additives to the cooling
system The additives may be
incompatible with coolant or
motor components.
●
Before opening the coolant
reservoir cover, make sure
that the engine, motor, HV
electronic control integrated
module, coolant reservoir cover
and radiator have cooled down.
Otherwise, the coolant may eject
and cause serious burns.
●
Do not open the upper cover of
the front compartment fuse box
when 󽗉lling the coolant.
●
Fill the coolant with a special
tool to prevent the coolant from
󽗊owing into the fuse box.
Washer
●
During normal use, check the liquid
level of the windscreen washer
reservoir at least monthly.
●
If the windscreen washer is used
frequently, the level of the washer
reservoir should be checked more
frequently.
●
High quality windscreen washer 󽗊uid
should be added to improve stain
removal and prevent freezing in cold
weather.
210