BYD SEAL U DM-i - Page 234

REMINDER
m) away from the vehicle. After
the repair, recover the warning
triangle for future use.
The warning triangle is used to warn
vehicles coming from behind and to
avoid collisions due to high speed or late
braking.
How to use the warning triangle:
1. Take the warning triangle out of its
box.
2.
Attach the ends to form a triangle.
3. Mount the supports as shown.
Using tyre repair kit
●
The tyre repair kit is used to seal small
cuts, especially cuts in tread pattern. It
is just an emergency solution for you to
drive to the nearest service centre, and
only for short emergency stretches,
even if the tyre is not de󽗊ated.
WARNING
●
The tyre sealant can repair holes
within 6 mm (0.2in) in diameter. If
the diameter is larger than 6 mm
(0.2in) or the hole is in another
position on the tyre, do not use
this product. Call for roadside
assistance.
WARNING
●
Tyre sealant is highly 󽗊ammable
and harmful to health. Take
necessary precautions to prevent
󽗉re and avoid contact with skin,
eyes, and clothing; keep it away
from children; and do not inhale
its vapour.
In case of contact with tyre
sealant:
●
If tyre sealant comes into contact
with the skin or gets into
the eyes, thoroughly 󽗊ush the
a󽗈ected body part immediately
with plenty of clean water.
●
Change contaminated clothing
immediately.
●
In case of an allergic
reaction, seek medical attention
immediately.
●
If tyre sealant is ingested by
accident, rinse mouth thoroughly
and drink plenty of water
immediately. Do not induce
vomiting, but seek medical
attention immediately.
Using the tyre repair kit
●
Please refer to the label on the in󽗊ator
for the detailed usage of the tyre repair
device.
●
If the in󽗊ator needs to be connected
to the power supply, please connect
the power plug to the 12V outlet
in the vehicle, start the vehicle, and
turn on the in󽗊ator switch.The tyre
repair device is 󽗉lled into the tyre
together with air through the hose of
the in󽗊ator.
233
07
WHEN FAULTS OCCUR