BYD SEAL U DM-i - Page 242

Seats:
Item Parameter
Seatback angle set for front seats 25°
Forward and backward moving spaces for
front seats
220 mm forward and 20 mm backward of
slide rail, the slide rail angle of 4.5
Normal service conditions of front
seatbacks
Design position of the backrest: 24.3°
forward and 50.7 backward
Seatback angle set for rear seats 28°
Forward and backward moving spaces for
rear seats
Design position: 15° forward and 5.625°
backward
Normal service conditions of seatbacks 28°
Oil parameters (2WD):
Item Model and speci󽗉cation Filling Amount
BYD472QA engine oil C5 0W-20 and above
Without 󽗉lter change: 3.1 L;
With 󽗉lter change: 3.3L
EHS special gear oil EHSF-2LV
2.5L for replacement(not
replace 󽗉lter assembly);
3.0L for replacement
(replace 󽗉lter assembly at
the same time);
3.6L for overhaul
Brake 󽗊uid DOT4/HZY6 1100ml±50ml
Coolant
Ethylene glycol type anti-
rust antifreeze
High temperature:
7.5L±0.5L
Low temperature: 6.0L+0.5L
Oil parameters (4WD):
Item Model and speci󽗉cation Filling Amount
BYD476ZQC engine oil C5 0W-20 and above
Without 󽗉lter change: 3.7 L;
With 󽗉lter change: 3.9L
EHS special gear oil EHSF-2LV
3.0L for replacement(not
replace 󽗉lter assembly);
241
08
SPECIFICATIONS