●
When the child restraint is installed on
the front passenger seat with a top
tether:
●
Route it through the aperture of the
head restraint.
Installation in the rear seat
●
The anchorage locations are identied
by a marking (see the illustration)
located on the seatback, directly above
the associated anchorages.
●
The rear outboard seats are equipped
with ISOFIX/i-Size anchorages.
CAUTION
The anchorages are located in the
gap between the seat cushion and
the seatback.
●
The rear seats are equipped with top
tether strap anchorages on the back.
CAUTION
●
When the child restraint is
installed with a top tether on a
rearoutboard seat, rst remove
the cargo cover, to have access to
the top tether anchorage.
●
When the child restraint system is
installed on any rear seat, The front
seats can be adjusted forward, and the
front seatback angle can be rotated, to
ensure there is no contact of the front
seats to the child.
●
To ensure that the vehicle seatback
can safely support the child restraint
26
To Next Page
Loading...
