EasyManua.ls Logo

BYD SEAL U DM-i - Page 69

BYD SEAL U DM-i
260 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
Before activating the remote
window closing, please con󽗉rm
that any body part of passengers
in the vehicle will not be stuck or
clamped by the window.
Locking/Unlocking with Microswitch
Locking
When the ignition is switched o󽗈:
When doors are closed but unlocked,
carry the intelligent key and
press the microswitch on the
front door handle to lock all
doors simultaneously. The external
rearview mirrors are folded in (when
the "Auto" switch of mirrors is on),
the turn signals 󽗊ash once, and all
door inside locks are locked after
about 8s. Check whether all doors
are locked 󽗉rmly.
With the vehicle powered ON:
When doors are closed, carry
the intelligent key and press the
microswitch on the front door handle
to lock all doors simultaneously. If
side mirrors do not fold, turn signals
do not 󽗊ash, and the alarm sounds
once.
If any door, hood or boot lid is not
closed, door outside locks can be
locked with the microswitch, but the
turn signals do not 󽗊ash, and the
horn sounds once.
Unlocking
In the anti-theft state, when carrying
the smart key into the activation
area, press the microswitch on the
front door handle to unlock all doors
simultaneously. The turn signals 󽗊ash
twice.
In anti-theft mode, after activating the
unlock function, open the doors within
30 seconds, or all doors will relock
automatically.
Pressing the microswitch does not
work if:
This is performed while a door is
being opened or closed.
The key is in the vehicle.
REMINDER
If the smart key is too close to an
exterior door handle or window,
it may not be possible to activate
the entry function.
Raising/Lowering Windows with
Microswitch
With the vehicle powered o󽗈, carry an
e󽗈ective smart key and press and hold
the microswitch to realize automatic
rolling up/down of four windows. Turn on
or o󽗈 the functions via (infotainment
system) → Vehicle Settings → Locks. By
default, the rolling up function is turned
on, and the rolling down function is
turned o󽗈.
Locking/Unlocking the Boot
Opening/Closing boot with smart key *
Double press the boot lid open button
on the smart key to open the boot lid.
68

Table of Contents

Related product manuals