BYD SEAL U DM-i - Page 70

Turn signals 󽗊ash twice. Press this button
again to stop opening. Then double press
it to close the boot.
Opening/Closing the boot from inside
the vehicle
●
When the boot lid is closed, if the
switch is pulled once, the boot lid is
unlocked and run to the set height
(maximum height by default).
●
When the vehicle is powered on and
the boot lid is opened, pull up this
switch to close the boot lid, and
release it to stop this lid at the current
position.
Opening the boot with exterior switch
Press the exterior boot lid switch while
carrying the smart key or when the
vehicle is unlocked to open the boot lid.
REMINDER
●
If the switch is pressed again while
the lid is in motion, it will stop at
its current position. If the button
is then pressed again, this lid
moves in the opposite direction.
① Power boot lid close button*
●
When the boot lid is open and
stationary, press the boot close button
to close this lid.
●
Press the boot close button a second
time to stop the lid at the current
position. If the button is then pressed
again, this lid will move in the opposite
direction.
② Vehicle lock button*
●
When the vehicle is powered o󽗈 and
the boot lid is opened, carry an
e󽗈ective smart key and press the
locking button to close the boot lid,
lock the vehicle and enter the anti-
theft state.
69
03
CONTROLLER OPERATION