EasyManua.ls Logo

BYD SEAL U DM-i - Page 71

BYD SEAL U DM-i
260 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REMINDER
Before closing the boot
electronically, make sure doors,
windows and sunroof are properly
closed.
Interior emergency unlocking of boot
lid
1. Remove the maintenance cover of boot
lid lock from the boot panel.
2. Pull the lever to unlock the boot.
REMINDER
When the vehicle is powered o󽗈,
the boot can be unlocked from the
inside in case of emergency.
Setting boot opening height
Open the boot manually or
automatically to the desired position,
keep it at this position, and then
press and hold the interior boot button
for over three seconds. The speaker
sounds for one second, indicating that
the opening height is successfully set
to the current position.
Adjust the boot open height via
(infotainment system) → Vehicle
Settings → Locks.
Anti-pinch
The power boot lid can automatically
open when obstructed by external
force during closing.
It stops moving when obstructed by
external force during opening.
When the boot fails to act
automatically
Manually and completely close the boot
for recovery.
When reconnecting 12V battery
Manually close the boot to ensure the
power boot lid functions normally.
WARNING
In order to prevent serious injury,
make sure to observe the following
precautions:
Never try to deliberately activate
the anti-pinch function.
Make sure to alert people nearby
of the lid motion.
Make sure hands and 󽗉ngers are
clear from the lid area when it is
closing.
Make sure the surrounding area is
safe when opening or closing the
boot.
Make sure the boot is properly
closed when the vehicle is in
motion.
Make sure to remove any ice
or snow from the area before
70

Table of Contents

Related product manuals