3. After locking the other three doors
except the driver's door, open the
driver's door, lift and hold the door
handle, and pull it to the maximum
opening angle.
4. Insert the mechanical key into the
keyhole, turn it anticlockwise as far
as it can go, return it to the initial
position and pull it out. (See "Locking/
Unlocking with Mechanical Key" in this
Chapter.)
5. Release the door handle and check
whether all doors are locked.
Unlocking:
1.
Remove the mechanical key from the
smart key.
2. Lift and hold the door handle and pull
it to the maximum opening angle.
3.
Insert the mechanical key into the
keyhole, turn it clockwise as far as it
can go, return it to the initial position
and pull it out.
4. Release the door handle, and pull it
again to open the driver's door.
5. Pull the interior handle twice to unlock
the three other doors.
REMINDER
●
Prevent excessive force from
distorting or breaking the key
during the operation.
Smart Access and Start
System
Use the smart key to unlock or lock the
vehicle doors and start the vehicle.
Access
Use the smart key to unlock or lock the
vehicle doors (for details, please refer to
"Vehicle locking/unlocking/locating with
smart key"and "Locking/Unlocking with
Microswitch").
Start-up
With the smart key inside, press the brake
pedal and the START/STOP button to
start the vehicle. (Refer to “Starting the
Vehicle".)
Aerial positions
① Interior aerial
② Exterior aerial
Active area
The smart access and start functions take
eect only when the registered smart key
is within the active area.
① The entry function activation area is
about 1.2 m away from the door handles
on both sides and the boot lid release
button.
② The start function activation area is
located in the compartment.
If another smart key is near this vehicle's
smart key, unlocking may take longer
than usual, which is normal.
72
To Next Page
Loading...
