EasyManua.ls Logo

BYD SEAL U DM-i - Folding Rear Seats

BYD SEAL U DM-i
260 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Seatback angle adjustment switch
Move this switch forward or backward
to adjust the seatback angle.
REMINDER
Releasing the switch stops the
seat in this position. Do not
place anything under the seat as
this may prevent the seat from
operating.
Heating and Ventilation Systems*
The user can slide down the state bar on
the top of the infotainment touchscreen
to open the Quick interface and turn on
or o󽗈 the seat heating and ventilation
system.
Heating adjustment
Seat heating: To control the heating
modes, the user operates the seat
heating switch on the infotainment
touchscreen. The heating function
includes: high-temperature mode and
low-temperature mode.
The initial state of the heating
indicator is o󽗈 after power-on.
When the switch is pressed for the
󽗉rst time, the seat heater works in
the high-temperature mode, and the
two heating indicators light up.
When the switch is pressed for the
second time, the seat heating pad
works in the low-temperature mode,
the 󽗉rst indicator lights up, and the
second indicator goes out.
When the switch is pressed for the
third time, the heating function is
turned o󽗈 and both indicators go out.
Ventilation adjustment
Ventilated seat: To control the working
mode of the ventilation fan, the user
operates the seat ventilation switch
on the infotainment touchscreen. The
seat ventilation includes: high-speed
ventilation and low-speed ventilation.
The initial state of the ventilation
indicator is o󽗈 after power-on.
When the switch is pressed for the
󽗉rst time, the seat ventilation fan
works at a high speed, and two
ventilation indicators light up.
When the switch is pressed for the
second time, the seat ventilation
fan works at a low speed, the 󽗉rst
indicator lights up, and the second
indicator goes out.
When the switch is pressed for the
third time, the ventilation function is
turned o󽗈 and both indicators go out.
Ventilation and heating functions
cannot be turned on at the same time
Press the ventilation switch to make
the ventilator work; if the heating
switch is then pressed, the ventilator
will stop and the heater will start to
work.
Press the heating switch to make the
heater work; if the ventilation switch is
then pressed, the heater will stop and
the ventilator will start to work.
Folding Rear Seats
Pull the strap on the rear seat to fold the
bench.
76

Table of Contents

Related product manuals