BYD SEAL U DM-i - Headlight Adjustment; Hazard Warning Light

Headlight Adjustment
Headlight adjustment switch
●
Press this switch to adjust the vertical
beam angle of headlights. After the low
beam is turned on, this switch works.
●
If the headlight adjustment switch
is in "0" position, the beam height
of headlights is the highest; if this
switch is in "5" position, the height is
the lowest. According to the driver's
needs, when the switch is adjusted
to a certain position from 0 to 5, the
beam height of headlights changes
accordingly.
Hazard Warning Light
After is pressed, all turn signals
start to 󽗊ash, and the turn signal
indicator on the instrument cluster
󽗊ashes synchronously. Press
again to
stop 󽗊ashing.
85
03
CONTROLLER OPERATION