BYD SEAL U DM-i - Page 99

damaged or loosely connected due
to rust, corrosion or ablation.
●
When the charging connector, port,
power plug, or socket is visibly
stained or damp, wipe them with a
dry and clean cloth to ensure the
connection is dry and clean.
●
Do not charge in any of these cases.
Otherwise, personal injury may occur
due to short circuit or electric shock.
●
Protect the charging equipment
against water contact on rainy days.
Using Mode 2 Charging Cable
1.
Equipment
●
It consists of a power plug(complying
with local standards), charger, plug/
charger protection cover, a connecting
cable and function box, referred to as
on-board charging. The power plug is
connected to the standard household
power socket, and the AC charger is
connected to the AC charging port of
the vehicle.
●
The power socket shall be a household
socket conforming to relevant national
standards to avoid circuit damage
and tripping caused by high-power
charging, so as not to a󽗈ect the normal
use of other equipment.
●
The use of special AC circuit and
power supply socket (230V, 10A) is
recommended.
●
Charging time: Refer to the charging
time message on the instrument
cluster.
WARNING
●
The highest working
temperature allowed for the
product is 50℃, and store the
product in a cool and dry place
when it is not in use.
●
When charging, do not place the
equipment in the boot, under
the front of the vehicle, or near
the tyres.
●
When using the equipment,
prevent it from getting rolled
over by the vehicle, dropped, or
trampled on.
●
Never drop the equipment or
pull it directly by its cable.
Take caution when moving the
equipment.
●
It is not recommended to use
any additional wire or adapter/
connector.
●
Do not use the charging
equipment when the household
power socket cable gets
softened and the charger is
damaged, like worn cables and
broken insulating layers.
●
Do not use the equipment when
the charging connector or power
socket experiences a breakage,
crack or other exposed damage.
●
The charging cable must not
be placed in a spiral during
charging, as this will a󽗈ect heat
dissipation.
●
Please contact a BYD authorized
service provider and select an
appropriate power supply as
required for the charging equipment.
98