BYD TANG 2024 - Page 101

●
Operate the charging equipment to
start charging.
●
The charging connection indicator
lights up on the instrument cluster.
●
In the charging process, the instrument
cluster displays relevant charging
parameters and the charging sign.
3. Stopping charging
●
End the charging:
●
Charging ends automatically when
early stop time is due or the charging
is complete.
●
Press the unlock button twice
within three seconds or press the
microswitch on the door handle to
stop charging.
●
Disconnect the charge port:
●
Press the unlock button on the
smart key or press the door handle
microswitch while carrying the smart
key and pull out the charging
connector.
●
When the DC charging pile charging
is complete, organize the charging
equipment and store the charging
connector in its designated position
properly.
●
Reinsert the DC charge port cap and
close the port door.
REMINDER
●
When the port cap is fully open,
do not close the charge port door.
CAUTION
●
If the charging connector cannot
be removed after unlocking,
try a few more unlocking
attempts. If that does not work,
try emergency unlocking. For
the operating procedure, see
"Emergency Unlocking of the
Charge Port" in "Charge Port Anti-
theft Lock".
●
To unlock the charge port after DC
charging, press the unlock button
twice within three seconds for the
operation to be successful.
●
See the charging instructions for
speci󽗉c charging precautions.
WARNING
●
See section "Charging
Instructions" for charging safety
warnings.
Scheduled Charging
●
The charging mode can be set on the
infotainment touchscreen. To access
the setting:
●
You can access this function by
touching the app Smart Charging on
the infotainment system.
●
Go to infotainment touchscreen
→ Energy → Charging and
Discharging → Smart Charging.
The scheduled charging screen is
displayed.
100