EasyManua.ls Logo

BYD TANG 2024 - Battery; High Voltage Battery

BYD TANG 2024
230 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Ensure the V2L connecting device
casing is not cracked, and its plug is
free from rust or obstructions.
Ensure that there is no water or
foreign material inside the charge
port and that metal terminals are
not damaged and free from rust or
corrosion.
Do not discharge if the above
second or third condition is found;
otherwise, short circuit or electric
shock so caused could lead to
personal injury.
Connect the discharge connection
device:
Connect the V2L discharge device
to the charge port. The power strip
indicator lights up when the strip is
powered and ready for use.
Discharging starts:
After the connection is made,
discharge begins and respective
information is displayed on the
instrument cluster.
Stopping discharging
Stop discharging:
Disconnect the load.
Disconnect the discharge connection
device:
Unplug the discharging device.
Close the charge port cap and the
port door (see instructions for Mode
2 charging).
Organizing the equipment:
Store the equipment properly when
discharging is complete.
Battery
High-Voltage Battery
The vehicle is powered by a high-
voltage battery that can be charged
and discharged repeatedly. The high-
voltage battery is charged by an
external power source or through
energy recovery when the vehicle
brakes or coasts.
The high-voltage battery is located at
the bottom of the vehicle, so be careful
when driving on uneven or 󽗊ooded
roads.
Battery Properties
It is normal that vehicle performance
is a󽗈ected by battery electrochemical
properties and self-protection and
varies to some extent in the following
conditions:
When SOC is high, the regenerative
braking performance may decline.
The vehicle switches to trickle
charging mode at high SOC. If the
charging time is prolonged, the
estimated remaining charging time
displayed on the instrument cluster
may not be accurate.
When SOC is low, the acceleration
performance may decline.
When the high-voltage battery is
low, V2L cannot be used as normal.
Charge the battery promptly.
At high or low temperatures, it
is normal that the charging and
discharging capabilities of the high-
voltage battery decline, and the
charging time is prolonged. Power
performance may also decline under
extreme temperatures.
106

Table of Contents

Related product manuals