BYD TANG 2024 - Page 119

Starting the vehicle
In normal cases, start the vehicle as
below:
●
Engage the parking brake 󽗉rmly.
●
Turn o󽗈 all unnecessary lights and
accessories.
●
Shift to "P" or "N".
●
Carry the correct smart key with you.
●
Press the START/STOP button while
pressing the brake pedal.
●
The vehicle is ready to drive when
the OK indicator lights up on the
instrument cluster.
The vehicle cannot power on when:
●
The vehicle cannot power on when:
●
After you press the START/STOP
button, the smart key warning light
turns on, a beep sounds, and
the message "Key not detected" is
displayed on the instrument cluster.
This means that the key is not in the
vehicle or cannot be detected due to
interference.
●
The electronic smart key is on the
󽗊oor, or in the cup holder, trunk, or
glove box.
Starting the vehicle in emergencies:
●
Engage the parking brake 󽗉rmly.
●
Turn o󽗈 all unnecessary lights and
accessories.
●
Shift to Park or Neutral.
●
The power mode is "OFF".
●
The electronic smart key is in the
vehicle.
●
Press and hold the START/STOP button
for more than 15s to start the vehicle.
WARNING
●
Do not touch the START/STOP
button while driving.
Auto Power On/O󽗈
●
Enable auto power on/o󽗈 in
infotainment touchscreen →
Vehicle → Locks. This function is
disabled by factory default.
●
When auto power on is enabled, power
on the vehicle in the following two
methods:
●
Method 1: Unlock with a valid smart
key, microswitch, NFC key, or digital
key*, and then open the driver's door
for the 󽗉rst time.
●
Method 2: Carry a valid smart key,
NFC key, or digital key*, and press the
brake pedal. The vehicle is ready to
drive.
●
When auto power o󽗈 is enabled, power
o󽗈 the vehicle in the following two
methods:
●
Method 1: Press the START/STOP
button.
●
Method 2: Shift to Park, and lock
from the outside with a valid smart
key, microswitch, NFC key, or digital
key*.
118