BYD TANG 2024 - Page 131

detection may also be a󽗈ected or
delayed by noise or electromagnetic
interference.
●
ACC cannot target vehicles with too
small contact ratio, so the driver must
keep control of the vehicle.
●
When the vehicle stops as it follows
a vehicle ahead, in rare cases, the
system does not recognize the end of
the vehicle ahead but the lower end of
the target (for example, the rear axle of
a truck with a high chassis or a vehicle
bumper). In such cases, the system
cannot ensure proper stop distance, so
the driver must stay alert and be ready
to brake.
●
Changing the vehicle structure, such
as lowering the chassis or changing
the front license mounting plate, may
a󽗈ect the ACC system.
●
Do not use the ACC system when
visibility is poor, or when driving on
slopes, winding roads, or wet roads
(covered in ice/snow or 󽗊ooded).
●
ACC cannot be activated in special
driving modes* like tow/snow/mud/
sand/terrain.
●
Make sure to go to a BYD authorized
dealer or service provider for
professional calibration and checking
of front mmWave radars or the multi-
purpose camera in any of the following
situations:
●
The front mmWave radar, front
bumper, or front windshield has been
removed.
●
Wheel alignment has been carried
out.
●
The vehicle has experienced a
collision.
●
ACC system performance has
degraded or the instrument cluster
has prompted an system error.
WARNING
●
ACC only serves as a driver
assistance function, so the driver
must be fully responsible for
driving safety.
●
In󽗊uence of weather, road
conditions, and other factors may
cause ACC to fail.
●
Use ACC based on your needs,
tra󽗋c, and road conditions.
Intelligent Cruise Control
(ICC)
●
The intelligent cruise control (ICC)
system integrates ACC and lane
centering control (LCC). It helps control
the vehicle both longitudinally and
transversely at speeds between 0 and
120 km/h to reduce the driving burden
and provide a safe and comfortable
driving environment.
●
When the function is enabled, the
driver must always hold the steering
wheel and control the vehicle when
necessary.
●
Longitudinal assistance, driven by the
ACC system, keeps the vehicle at a
󽗉xed speed or a 󽗉xed distance from the
road user ahead.
Status Description
●
ICC standby:
●
The ICC system is on standby
by default and can be manually
activated. If the vehicle does not
meet activation conditions, the
vehicle must be checked until such
conditions are met. At this time,
is displayed on the instrument
cluster.
130