BYD TANG 2024 - Function Definitions

Rear A/C Operation Interface
1 Rear A/C controls
2 A/C ON/OFF
3 Auto mode
4 Rear button lock
5 Air distribution
6 A/C temperature control
7 Fan speed control
Function De󽗉nitions
Auto mode
●
After tapping this button, its indicator
lights up on the front A/C panel,
and compressor status, fan speed
and air distribution can be adjusted
automatically.
●
The vehicle exits auto control if fan
speed or air distribution is set, and
other functions remain in auto mode
except for those that have been
operated.
A/C ON/OFF
●
Tap this button to disable the A/C if it is
ON.
●
Tap this button to enable the A/C if it is
OFF.
Max cooling
●
Tap this button to switch the A/C to
the maximum cooling control mode.
The temperature is set to "Lo", the
fan speed is set to the maximum, the
recirculation mode is activated, and air
is directed to face level.
●
Tap this button again to exit.
A/C button
●
Tap this button to activate the A/C
compressor. The compressor then
starts to work.
●
Tap this button again to deactivate
the function, and the compressor stops
working.
Circulation mode
169
05
IN-VEHICLE DEVICES