REMINDER
keep running for a while after the
vehicle is powered o and locked.
That is because the condensed
water on the surface of the
evaporator needs to be dried to
prevent mold fermentation. It is
normal for the A/C blower to start
running automatically when you
lock the vehicle. No need to worry
about it.
Air Purication System
The air purication system puries
airborne PM2.5 particles. When A/C
is turned on, the system thoroughly
removes PM2.5 particles from the air
blown into the cabin.
Air Purication Interface
1 PM2.5 detection
2 Quick purication
3 Anion
4
In-vehicle PM2.5 value and level
display
5 Outside PM2.5 value and level
6 Air purication
PM2.5 detection
●
Tap this button to detect interior
and exterior air quality. The detection
values and levels are displayed on the
infotainment touchscreen in real time.
●
Tap a second time to turn o air quality
detection function.
Quick purication
●
Tap this button to enable quick
purication.
●
Tap a second time to disable it.
Anion
●
Tap this button to activate the anion
generator.
173
05
IN-VEHICLE DEVICES