BYD TANG 2024 - Page 213

●
Pull over the vehicle and check the tire
pressure on the instrument cluster.
●
If the tire pressure is greater than
220 kPa, drive to the nearest service
center at a speed below 80 km/h.
●
If the tire pressure is between 130
and 220 kPa, repeat the process
to 󽗉ll the tire sealant into the tire
and observe the tire pressure gauge
reading on the in󽗊ator.
●
If the tire pressure does not reach 130
kPa, it is recommended to contact
a BYD authorized dealer or service
provider.
REMINDER
●
Using tire repair device on
damaged tires is only an
emergency solution. Please
change the tires at a professional
repair center as soon as possible.
It is recommended that you
contact a BYD authorized dealer
or service provider and inform the
maintenance technician that the
tires contain tire sealant.
●
Avoid hard acceleration and high-
speed turns.
●
Abide by the maximum vehicle
speed limit of 80 km/h. Do not
continue driving if any strong
vibration, driving instability, or
noise occurs while the vehicle is
running.
REMINDER
●
When the tire sealant is about
to expire (see the label on the
canister for exact date), replace it
with a new one.
●
After using the tire repair device,
it is recommended that you
purchase new tire sealant at a
BYD authorized dealer or service
provider.
Removing the Anti-theft Wheel Nut*
Each wheel is 󽗉tted with an anti-theft
wheel nut, and you need a special
adapter in the tool box to remove it.
How to remove:
1. Take out the lug nut cover removal
clamp, and remove the cap.
2.
Take out the anti-theft wheel nut
socket ① from the tool kit and connect
it to the wheel nut ②. After loosening
the socket, the anti-theft wheel nut
can be removed.
212