BYD TANG 2024 - Installing Child Restraint Systems

WARNING
system and in this manual to
make sure the child restraint is
properly installed in the vehicle.
●
After the child restraint is
dismounted from the seat, store it
safely in your vehicle.
●
Failure to follow the instruction
provided with the child restraint
and in this manual may cause
injuries and even death to your
child in an accident.
Children must use a suitable child
restraint when traveling in the vehicle.
Children should sit comfortably and
safely. Make sure that the child restraint is
positioned, mounted, and used correctly.
Important considerations for selecting
a child restraint system
●
The child restraint is the correct type
and size for the child.
●
The child restraint system is the correct
type and size for the seating position.
●
The child restraint system must be
homologated by ECE R44/R129.
Passenger airbag switch
●
The switch is located on the dashboard
of the front passenger side.
●
See
P82 for details.
WARNING
●
Never use a rear-facing child
restraint on the front passenger
seat if the airbag is activated.
Installing Child Restraint
Systems
Follow the installation instructions
provided by the child restraint
manufacturer. Secure the child restraints
to the rear seats. Both the second-
and the third-row seats are equipped
with ISOFIX anchors for child restraints.
Make sure to fasten the top tether when
installing a child restraint.
Child Restraint System Anchorages
Front passenger seat
●
The front passenger seat is equipped
with ISOFIX/i-Size anchorages. The
anchorage locations are identi󽗉ed by
a marking (see illustration) located
on the seatback, directly above the
associated anchorages.
●
The front passenger seat is equipped
with tether strap anchorages on the
back.
23
01
SAFETY