Always follow the instructions below
when using a child restraint on a rear
seat:
●
When the child restraint system is
installed on any rear seats, front seats
can be adjusted forward to ensure
that the child is not in contact with
the front seats. Meanwhile, the front
seatback angle can also be adjusted to
have more space.
●
The head restraint can be adjusted
or even removed to ensure that the
vehicle seatback can safely support the
child restraint system.
●
When a child restraint is used without
a seatback, or the seat is occupied
by an adult, never remove the head
support from the vehicle, and adjust it
to the required height position.
●
When the top tether is used on a
outboard rear seat, route it at the
outside of each head post.
●
For more installation instructions,
please read the instructions provided
with your child restraint system.
Details on child restraint system
installation:
① Driver seat
② Front passenger seat
③ Second-row left seat
④ Second-row center seat
⑤ Second-row right seat
⑥ Third-row left seat
⑦ Third-row right seat
26
To Next Page
Loading...
