EasyManua.ls Logo

BYD TANG 2024 - Adjusting Second-Row Seats

BYD TANG 2024
230 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
The automatic driver seat function
can be interrupted by closing the
driver's door while the seat is moving
backward or by opening the door
while the seat is moving forward.
Heating and Ventilation Systems
The front seats are equipped with seat
heating and ventilation systems. To turn
on or o󽗈 the systems, slide down the
top status bar on the infotainment
touchscreen to display the shortcut page,
or go to the A/C operation interface.
Heating adjustment
Seat heating: On the infotainment
touchscreen, tap the seat heating
control to set seat heaters to level 1
(low) or 2 (high).
When the vehicle is just powered
on, the driver's seat is automatically
set to the level (o󽗈, 1 or 2) the last
time the vehicle is powered o󽗈. The
passenger seat heaters are disabled
by default.
If the heaters are o󽗈 after the vehicle
is powered on, tap the control once
on the touchscreen to set the heating
level at 2 (high).
Tap a second time to set the heating
level at 1 (low).
Tap a third time to turn o󽗈 the seat
heaters.
Ventilation adjustment
Seat ventilation: On the infotainment
touchscreen, tap the seat ventilation
control to set seat ventilators to level 1
(low) or 2 (high).
When the vehicle is just powered
on, the driver's seat is automatically
set to the level (o󽗈, 1 or 2) the
last time the vehicle is powered o󽗈.
The passenger seat ventilators are
disabled by default.
If the ventilators are o󽗈 after the
vehicle is powered on, tap the control
once on the touchscreen to set the
ventilation level at 2 (high).
Tap a second time to set the
ventilation level at 1 (low).
Tap a third time to turn o󽗈 the seat
ventilators.
Ventilation and heating functions
cannot be turned on at the same time.
Press the ventilation switch to make
the ventilator work; if the heating
switch is then pressed, the ventilator
will stop and the heater will start to
work.
Press the heating switch to make the
heater work; if the ventilation switch is
then pressed, the heater will stop and
the ventilator will start to work.
Adjusting Second-Row
Seats
Adjusting Second-Row Seats Manually
Second-row seats allow manual
adjustments for seat position and
seatback angle. Choose the following
methods according to the actual
con󽗉guration of your vehicle.
Seat position adjustment
To move forward or backward, hold
and pull up the adjustment lever, slide
to the desired position, and release.
After adjusting the seat, always check
that it is securely locked into place
(i.e., a locking sound is heard) by
attempting to push it forward and
backward.
66

Table of Contents

Related product manuals