Head Supports
Adjusting Front-Seat Head Supports
Adjusting a front seat four-way head
support
The front row head supports are
equipped with curved posts for up/down
and front/back adjustment.
1. Lifting a head support
Lift the head support in the direction
of its post until it is in the appropriate
position, and then release it until a
locking sound is heard.
2. Lowering a head support
Press and hold the head support
adjustment button, lower the head
support to a proper position, slightly
raise the head support, and release the
button after hearing a locking sound.
3. Adjusting a head support forward
Push the head support forward to the
desired position and release it until a
locking sound is heard.
4. Adjusting a head support backward
Press and hold the adjustment button
on the left of the head support,
push the head support backward to
the desired position, and release the
button until a locking sound is heard.
Removing a front seat four-way head
support
1. Lifting a head support
Hold the adjustment button on the left
and raises the head support to the
topmost position.
2. Unlocking one post
Keep holding the adjustment button,
and use a needle whose diameter is
slightly less than 2 mm against the
small round hole of plastic trim cover
under the head support. Then, pull up
one post until the post slot is exposed.
3.
Unlocking the other post
Repeat step two to unlock the other
post.
4. Removing a head support
Pull the head support upward until it is
fully detached from the seatback.
Adjusting Rear-Seat Head Supports
Adjusting second-row seat head
supports
Head support adjustable in height:
1. Lifting a head support
Lift the head support in the direction
of its post until it is in the appropriate
position, and then release it until a
locking sound is heard.
2. Lowering a head support
Press and hold the head support
adjustment button, lower the head
68
To Next Page
Loading...
