Canceling currently set speed
Operate the switch in the direction or depress the brake pedal to turn off the cruise control
system
Speed adjustment
Acceleration
Deceleration
Operate the switch in the or direction; at the moment, the "SET" indicator on the
combination instrument will illuminate.
Overtaking acceleration
In the cruise control mode, if you depress the accelerator pedal to accelerate and no other
operation is performed after acceleration, the vehicle will slow down to the speed set before
the acceleration; if you depress the accelerator pedal and meanwhile operate the switch in
the or direction, the speed can be set and the vehicle will cruise at this speed.
The lane departure warning system identifies the lane lines by using the camera sensor.
When the vehicle speed is higher than 60 km/h and the driver unconsciously departs from
the lane, the system issues an alarm to alert the driver to driving safety.
■ You can turn on or off the lane
departure warning system directly by
operating the functional switch on the
driving assist switch set.
To Next Page
Loading...
