Handling Care
To remove currently installed tip: Use
your thumb to gently push from the back on
just one side. It should gently come o at an
angle without damaging the foam. Silicone
tips need to be pinched at the bottom for
grip.
To install new tip: Press the edge of the
plastic stem against the center hole. Next,
press and rotate the tip until it is fully
positioned on the stem.
Removing the foam tip cushions repeatedly may reduce
longevity. Pulling on cord to remove earbuds can damage
the internal wires causing failure. Please remove the
earbuds by gripping the stem base and pulling gently.
Do not use lsopropyl/Rubbing Alcohol to clean foam tips.
To Next Page
Loading...