C-TECH-I LI-VLK-1 User Manual

C-TECH-I, INC
USERS' GUIDE
Single Lever Pull-out Kitchen Faucet
Applied Models: LI-VLK-1, LI-VLK-5, LI-VLK-6, LI-VLK-8, LI-VLK-9
Thank you for selection our products.
This Instruction contains the usage, manipulation, maintenance etc. To help
insure that the installation process will proceed smoothly, please read these
instructions carefully before you begin.
Note:
z Before installing the faucet, please read the instruction carefully.
z To avoid the impact of poor water quality on the usage of the faucet, we
recommend that you install the aerator and check valve in water supply
pipe which manufactured by our company. Please refer to the local dealer
for details.
z Do not disconnect the faucet body by yourself.
Tools and Materials:
z Assorted Screwdrivers
z Adjustable Wrench
z Pipe Wrench
z Wrench
z Pliers
z Thread Sealant
z Other tools as needed
1

C-TECH-I LI-VLK-1 Specifications

General

Type	Valve
Material	Brass
Connection Type	Threaded
Size	1 inch
Category	Plumbing

Summary

Installation Guide

Mounting the Faucet Body

Steps to install the faucet body into the sink hole using rubber washers and a pipe cover.

Securing the Faucet

Instructions for attaching the faucet to the sink using washers and a locknut.

Connecting the Pull-out Spray

Detailed steps for installing the pull-out spray assembly onto the faucet.

Connecting Hoses

Procedure for connecting the inlet hoses and spray hose to the faucet body.

Water Supply Preparation

Key points to check before connecting the inlet hose to the water supply pipe.

Faucet Configuration Details

Maintenance and Upkeep

Aerator Cleaning

Periodically disconnect the aerator cover for cleaning to prevent jams and damage.

Water Pressure Requirements

Specifies the recommended water supply pressure range for cold and hot water.

Surface Cleaning Instructions

Guidelines for cleaning the faucet surface using clean water and soft cloth.