CABASSE STREAM 3 - Page 22

e n g l i s h
22
23
USE OF STREAM 3 WITH THE DEDICATED
REMOTE CONTROL
Stream 3 can be used from the end of the quick set-up pro-
cess (pages 5 and 6).
Switch the ON/OFF button to ON and power on one of the
sources connected to Stream 3 to get the system ready and
enjoy the Cabasse sound.
Eight dedicated keys are enough to run the Cabasse system:
-
1
to power on or stand-by Stream 3
-
4
to temporary mute the volume
- « Vol+ »
3
to raise then sound level
- « Vol- »
2
to lower the sound level
-
5
and
6
to select previous or next track
-
7
to play or select stand-by
-
8
to select sources
SELECTING AND PLAYING SOURCES WITH
THE REMOTE CONTROL
Stream 3 offers 4 different inputs that can be selected with
the (8) key of the remote control:
- One S-PDIF optical digital input, identied by the red LED
in the IR module. To be connected to a TV, a digital video
tuner and/or recorder, a CD player or any source with optical
output.
- One RCA analog input, identied by the green LED in the IR
module, mainly used to connect a TV, a DVR or a dock.
- One Bluetooth module, identied by the blue LED in the IR
module, mainly used to play audio les stored in tablets and
smartphones as well the soundtracks of all the applications
available on an Apple or Android machine.
- One LAN-WLAN module, identied by the orange LED in
the IR module that enables the Stream 3 to become the audio
player of your domestic network. Easy play with the Cabasse
application for Apple or Android for smartphone or tablet of
all shared audio les and more.
CONNECTIONS
Stream 3 has been designed for trouble free wiring, the
only possible mistake is the reversal of right and left when
hooking up the satellite speakers or using the RCA-RCA
connections between the Santorin 21C-W and a source.
Please follow carefully the quick plug play procedure.
CAUTION ! To prevent the risks of electric shock take
care to completely insert plugs of mains cords.
SUBWOOFER ADJUSTING
7
:
Take care positioning the sector switch 110-120V/220-240V
in the right position according to your country.
The POWER switch (located on the back) of the subwoofer
has 2 positions:
OFF : Stream 3 is disconnected from the power supply
network.
ON : the power LED is green.
STAND-BY MODES: Select one of the two possible modes
using the POWER MODE switch on the back of the subwoo-
fer. Switch off and on to validate a new setting.
- FULL AUTO MODE: any sound signal arrival from any
wired or wireless source connected to the Stream 3 will turn
the system on. Any prolonged lack of signal will turn the
system back to stand-by. The wi and bluetooth modules
remain on, Bluetooth pairing is always possible. The power
LED is red during stand-by mode.
- ECO AUTO MODE: the wi and Bluetooth modules are
turned off to minimize the power consumption down to
0.19 W.
STAND-BY MODE ACTIVATIONS:
Auto-stand-by: after 6 minutes with no activity coming from
the selected source. “No activity” means:
o For a RCA source: No sound signal
o For an optical source: No light=source off
o For a Bluetooth source: source is off or disconnected
o For a wi or RJ45 source: no streaming running.
Manual stand-by: push the power switch of the Stream
remote control. When a wi or RJ45 source is being played,
stand-by activation needs 5 seconds in order to stop the LAN
ow.
OPERATION MODE ACTIVATIONS:
Auto-on with the activation of a source connected to the
Stream 3. Under FULL AUTO mode, a Bluetooth pairing with
a smartphone and its selection as a source will automatically
turn the Stream 3 on.
Manual on: push the power switch of the Stream remote
control.
Turning the system on from FULL AUTO stand-by takes 5
seconds and it takes 40 seconds from ECO AUTO stand-by.
CAB_Stream3_FR-GB-DE.indd 22 04/06/13 16:15