A) Select a smooth level site. Take out the tent and components. (FIG-1)
B) Lay out the tent and position it so the doors face the desired direction.
C) Unzip door.
D) Spread out the tent and locate all four corners. (FIG-2)
#2822933
EASY-UP DELUXE SHOWER SHELTER
FIG-1
1. LAYOUT AND POSITION TENT
A) Raise the tent. Extend each of the 4 telescopic corner legs until they
snap into place. (FIG-3)
B) Enter the tent and push middle of roof up to create peaked roof. (FIG-4)
2. EXTEN THE TENT
Stake each of the tent s 4 corners sing stakes provided.
(FIG-5)
3. SECURE THE TENT
A) Place the rainfly over the top of the tent body. ( FIG-6 )
B) Secure the rainfly by hook. ( FIG-7 )
4. ATTACH RAINFLY
A) Attach the floor liner by hook. (FIG-8)
B) Attach the hanging bag by hook. (FIG-9)
C) Secure the guyline by stake. (FIG-10)
5. ATTACH ACCESSORIES
FIG-2
FIG-3 FIG-4
FIG-5
FIG-6 FIG-7
FIG-8
FIG-9
FIG-10
Buckle and compress the webbing straps around the top corners of the
frame. This will stabilize the frame and allow you to use a heavy shower
bag when not using the rainfly.
To Next Page
General