Press “0” for three seconds to active the Alarm-U system. If
the safe is tampered with, the alarm will sound for 30 seconds.
To stop the alarm from sounding, enter the correct passcode.
Safes with the Alarm-U system
TM
TM
If 3 incorrect passcode entries are made in succession, the alarm will sound and the
safe will be in automatic lockout for 30 seconds. If 3 more failed attempts are entered,
is locked. You can use your override key at any time to open the safe.
After tampered alarm, please enter “0” to active the Alarm-U system again.
TM
You can mute/unmute the keypad by entering the button
Turning the keypad sound off/on with Mute-U system
TM
.
3
To Next Page
Loading...