Caddytek CaddyLite ONE-S - Page 6

Remove front wheel for storage of the cart
Make sure the handle height adjusting knob is fully tighten .Slightly lift up the handle as Fig. 6 then
press the folding button and push the handle downward as shown in Fig. 7 , Fig. 8 to fold the cart
till the main frame clicks into the holding slot as in Fig. O. The cart folded as Fig. 9.
Fig. 6
Fig. 9
3
Folding the cart
Folding push
button
Fig. 7
Fig. O
the holding slot
Fig. 8
Handle height
adjusting knob
Remove front wheel by pressing the release button as shown in Fig. 10 to store the cart conveniently
as Fig. 11.
button
Fig. 10
Fig. 11