3. Press or to scroll to SYSTEM SETUP REPORT and press ENTER.
Print a battery label
1. Perform the required service on the battery. Do not remove the battery
from the adapter.
2. Press PRINT.
3. Press the station key of the station that contains the battery.
4. Press or to scroll to BATTERY LABEL.
5. Press ENTER.
Print a label with a battery ID bar code
1. Perform the required service on the battery. Do not remove the battery
from the adapter.
2. Press PRINT.
3. Press the station key of the station that contains the battery.
4. Press or to scroll to ID # BAR CODE LABEL.
5. Press ENTER.
Print a label with a bar code for the active C-code
1. Press PRINT.
2. Press the station key of the station that contains the battery.
3. Press or to scroll to BAR CODE FOR ACTIVE C-CODE.
4. Press ENTER.
Cadex Electronics Inc. C7000-C Series Battery Analyzers .
88
To Next Page
Loading...
