OFF
Turns off the dayinight function and compass.
The
mirror
will
stay
in
the day setting.
To
keep
the photocells operating
well,
occasionally clean
them
with a
cotton
swab
and glass cleaner.
M:
This
turns
on
the day/night portion
of
the mirror
to
automatically
reduce glare.
C/M:
This setting turns on the compass in addition
to
the dayinight
function.
A
letter denoting the direction headed
will
appear
in
the top
right corner
of
the mirror.
Once
the
compass
is
calibrated,
it
does
not
need to
be
recalibrated.
To
calibrate the compass:
1.
Set the switch
on
the mirror control
to
C/M.
2.
Turn the vehicle ignition switch
ON.
The Ictter
C
should be displayed
in
the mirror compass window.
If
not,
hold
the
Cal
switch (bottom
of
the mirror) for more than
10
seconds, and thc letter
C
will
appear.
To
hold
in
the
Cal
switch, insert
a
paper clip into the small
hole
on
the
bottom
of
the mirror housing.
The
display
will
show
a
number
first, hut
keep
holding
urltil
the letter
C
appears.
than
5
mph
(8
km/h)
until
the
display reads
a
compass
direction. For
3.
For
quick calibration, drive
the
whiclc
in
a
360-degree circle
at
less
3-60
..
-
To Next Page
Loading...
