A
CAUTION:
Rust
or
dirt on the wheel, or on the
parts
to
which it is fastened, can make the wheel nuts
become loose after
a
time. The wheel could come
off
and cause an accident. When you change
a
wheel, remove any rust or dirt from the places
where the wheel attaches to the vehicle. In an
emergency, you can use
a
cloth or
a
paper towel
to do this; but be sure to use
a
scraper or wire
brush later,
if
you need to, to get all the rust or
dirt off.
pL
CAUTION:
Never use oil
or
grease on studs or nuts.
If
you
do, the nuts might come loose. Your wheel could
fall
off, causing
a
serious accident.
7. Replace the wheel nuts
with the rounded end
of
the nuts toward the
wheel. Tighten each nut
by
hand until the wheel
is held against the hub.
To Next Page
Loading...
