Shoulder
Belt
Tightness
Adjustment
Your
car
has a shoulder
belt
tightness adjustment
feature. If the shoulder belt
seems
too tight, adjust it
before you begin to drive.
1.
Sit well back in the seat.
2. Start pulling the shoulder belt out.
3.
Just before it reaches the end, give it a quick pull.
4.
Let the belt
go
back
all
the way. You should hear a
slight clicking sound.
If
you
don’t,
the adjustment
feature won’t set, and you’ll have to
start
again.
5. Now you can add a small amount of slack. Lean
forward slightly, then sit back.
If
you’ve added more
than
1
inch (25
mm)
of
slack, pull the shoulder belt
out as you did before and
start
again.
If
you
move around
in
the vehicle enough, or if you pull
out
the shoulder belt, the belt will become tight again.
If
this happens, you can reset it.
1-16
~
~
To Next Page
Loading...
