If the belt stops before
it
reaches the buckle, tilt the latch
plate and keep pulling until you can buckle
it.
Pull up on the latch plz-te to make sure it is secure.
If
the belt is not long enough, see “Safety Belt
Extender” at the end of this section. Make sure the
release button on the buckle is positioned
so
you
would be able to unbuckle the safety belt quickly
if
you ever had to.
1
3.
To
make the lap part tight, pull down on the buckle
end
of
the belt as you pull up
on
the shoulder
part.
1-33
To Next Page
Loading...
