MIST:
Turn the band toward you and then release it for.
a
single wipe cycle. For more cycles, hold the band on
MIST
longer.
LO
or
HI:
Turn
the
band away
from
you to either
LO
(low speed) or to
HI
(high speed), depending on the
wiper speed
you
want.
DELAY:
You can set the wiper speed for a long
or
short
delay between wipes with this setting. Move the band to
the
DELAY
position. The closer you move it to
LO,
the
longer
the
delay. (Eldorado Only)
OFF’:
Tun
the band to
OFF
to turn
off
the wipers.
Be sure to clear ice and snow from the wiper blades
before
using
them. If they’re frozen to the windshield,
carefully loosen or thaw them.
If
the blades do become
damaged, get new blades or blade inserts.
Heavy snow or ice can overload the wiper motor.
A
circuit breaker will
stop
the
motor
until
it
cools.
Clear
away snow or ice to prevent an overload.
This-moisture sensor
is
mounted on the passenger’s
interior side
of
the windshield behind the rearview
mirror and
is
used to automatically operate the wipers
by monitoring
the
amount
of
moisture that
is
on
the windshield.
To Next Page
Loading...
